Apr 04 2016

Fire Alarm Test Report

Category: Fire Alarm,Questions and Answers,TestingBKeyes @ 12:00 am

Q: Does NFPA 72-1999 edition specifically state that annual fire system inspection documentation include an itemized inventory of each system device as passed or fail? Does a report stating that (i.e. 20 pull stations passed, 72 smoke detectors passed, 19 duct detectors passed) satisfy the requirement?

A: Specifically? I would say it does, but if you want to see the words: “Every annual fire alarm system documentation must include an itemized inventory of each device as passed or failed” … you will not find those words in NFPA 72, 1999 edition.

What it does say is this: Section 7-5.2.2 requires documentation of the fire alarm test to comply with all the applicable information found in Figure 7-5.2.2. On page 3 (of 4) of figure 7-5.2.2, the documentation required by NFPA 72 includes:

    • Location of the device
    • Serial number of device
    • Device type
    • Visual check
    • Functional test
    • Factory setting
    • Measured setting
    • Pass of Fail

In addition to that requirement for annual testing, section 7- requires all components affected by a change to the system to be 100% tested. This is in regards to a change to the system, like the addition of an initiating device all the devices on the circuit for the new device must be tested.

So, I would say NFPA 72 (1999 edition) does specifically require the documentation of whether or not each device passed or failed its test. Also, it is now an interpretation by many of the national AHJs for healthcare organizations that each test report has this information documented. The logic for this requirement is solid; how does the facility manager know that the fire alarm testing technician actually tested each and every device in their building, if you do not know where they are, and document the results of each test?

A report stating that 20 pull stations passed, 72 smoke detectors passed, 19 duct detectors passed their inspection would NOT satisfy the reporting requirement, as I understand it. There needs to be an inventory list showing each device location and whether or not it passed or failed its test.


It makes good sense.